KEY Components

        MEIDIBAO DC Inverter Water Source Heat Pumps use high quality components, such as       Panasonic,Mitsuibishi,Hitachi,Copeland etc compressors, Danfoss,HuaLu,SanHua etc Electronic                                  expansion valve and Wilo Para series circulating water pump, etc.

Craftmanship

  We care every detail on what you need!

       Super Low Noise: Silencer cotton for compressor and strong pads to avoid vibration

       Anti-corrosion: Aluminum edging                         

       Exellent Welding Guarantee No Leakage: Four-way valve of famous brands welding protection 

        Energy Saving: 30mm thickness foam pipe for insulation to prevent energy lost

Simplicity Description

  Meidibao DC inverter water source heat pump utilize DC inverter technology and REPM compressor which running speeds can be adjusted follow the variation of ambient or water temperature, hence to regulate the output capacity with changeably, this can heat the storage tank or room much quicker than normal on/off heat pumps, and balance the water or air temp very precisely. 

  This also provides a very high COP as inverter system does not waste the energy.  By inverter technology of frequency changeable the inverter heat pump can increase the compressor speeds to be more than 5000rpm at low ambient. This can increase refrigerant mass flow rate to offset the source energy loss in very cold climate and keep an acceptable performance

  With rated heating capacity 25KW and High COP Geothermal/Water Source Heat Pump for House Heating & Cooling

1. High Cop: 5.10(Rated working condition: heating: source side inlet/outlet water temp: 10℃/7℃, use side inlet/outlet water temp: 30℃/35℃)
2. Hot Water Temp: 20℃ to 65℃
3. Power Supply: 380V/50Hz/3P
4. Source Side Temp: -3℃ to 30℃
5. Heating Capacity: 25KW

Specification